A new gravel driveway around Cincinnati costs about $9,200 for 150 ft by 12 ft, with most jobs running $8,250 to $11,050. That works out to roughly $61 per foot, built on a real base. Putting fresh stone on a solid existing driveway costs far less: about $4,300 for 300 ft.
What is in that price
Those numbers are for a driveway that holds up, not a load of gravel dumped on dirt. Our standard build is:
- Topsoil stripped along the path
- Woven stabilization fabric so the stone does not sink into the clay
- 6 inches of compacted #2 base stone
- 2 inches of #304 on top, compacted into a hard driving surface
- A crown so water runs off both sides
- Shoulders seeded and strawed, stone delivery included
What moves the price
Length is the big one, and longer driveways cost less per foot because the slow part is the entrance and the first stretch. Width matters too: 16 ft costs more than 12 ft.
A ditch at the road means a culvert. Added to a driveway job on the same trip, a 15 in by 24 ft culvert runs about $2,150, plus the county or township permit fee at cost.
- Soft or wet ground that needs more base
- Steep stretches, which take longer to build and can wash
- Trees, stumps or brush in the path (our Brushworks crew clears it first)
- Tight access for the machines, or a long drive from our Loveland shop
New driveway or fresh stone?
If the base is solid and the drive just looks tired, a resurface is the cheap fix: we regrade it, rebuild the crown and add 2 inches of new top stone for about $4,300 on 300 ft. If you have ruts, mud and stone disappearing into the dirt every spring, the base is gone and a rebuild is what lasts.