Driveway & Road Building

A driveway is only as good as the base

We build gravel driveways, access roads, and turnarounds with the base, crown, and drainage needed to survive real weather and real traffic.

Subgrade prep
Compacted base
Drainage crown
Culverts + turnarounds

Why it matters

A well-built driveway or access road is one of those things you don't think about until it fails. A poorly constructed driveway washes out in heavy rain, develops ruts under vehicle weight, or turns into a muddy mess every spring. Ground Co. builds gravel driveways and access roads that hold up — throughout Greater Cincinnati's wet springs, hot summers, and freezing winters.

The key to a long-lasting gravel driveway is what you can't see: the base. We start by removing organic material and weak subgrade soils, then install and compact a suitable base aggregate before applying the finish surface. Skipping or skimping on this step is why so many DIY and low-bid driveways fail within a few years.

Drainage is the other critical factor. We design every driveway with proper crown to shed water to the sides, and we install culverts or drainage swales where needed to prevent water from pooling on or alongside the driveway. This is especially important in Greater Cincinnati, where heavy rainfall is common and clay soils drain slowly.

Best fit

When this is the right move

New gravel driveways and long access roads

Washed-out or muddy existing drives

Rural properties, barns, shops, and jobsite access

Turnarounds, parking pads, and construction entrances

Watch-outs

Where cheap work gets expensive

!

Thin gravel over mud

!

No crown or ditch line

!

Skipping geotextile where subgrade is weak

!

Ignoring culverts and water crossings

What's Included

Every driveways project includes these services

Driveway planning and layout
Tree and brush clearing for route
Subgrade preparation
Drainage provisions
Base material installation
Gravel surface application
Grading and crowning
Turnaround and parking areas

Our Process

How we approach every driveways project

01

Planning

We survey the route, plan for drainage, and determine the best layout for your property.

02

Preparation

We clear the route, remove organic material, and prepare the subgrade.

03

Base Work

We install and compact base material to create a solid foundation.

04

Finishing

We apply the final surface material, crown for drainage, and ensure smooth transitions.

Common Questions

Frequently asked questions about our driveways services

A properly built gravel driveway typically has 4-6 inches of compacted base material topped with 2-3 inches of surface gravel. Depth may vary based on soil conditions and expected traffic.
We typically use crushed limestone or similar local stone. The base layer is larger aggregate that compacts well, while the surface layer is smaller material for a smooth finish. We can discuss options based on your preferences.
With proper construction and occasional maintenance (adding surface gravel every few years, grading as needed), a gravel driveway can last indefinitely. The key is proper initial construction with good drainage.

Ready to Get Started?

Let's discuss your driveways project. Get a free quote today.